China 1688 Axial/Radial Combined Load Bearings Yrt200 Rotary Table Bearing Motorcycle Parts Bearing bearing driver

Item Description

The Product Description

The YRT turntable bearing is made up of a thrust/mandrel ring, a thrust/mandrel seat ring, a thrust washer, 2 needle roller retentive assemblies, and a set of radial cylindrical rollers.Both the seat and shaft rings are presented with screw holes for mounting. The product has large axial and radial bearing potential, large tilt stiffness and extremely substantial precision.Suited for rotary tables and bearing configurations for measuring and screening.YRT collection bearings have high rotational accuracy, can bear radial load, bidirectional axial load and overturning instant, suited for high precision and can bear joint load instances.

The Firm Description

HangZhou Xihu (West Lake) Dis. Bearing Technological innovation Co., Ltd. was established in December 2005, found in the HangZhou Airport Industrial Cluster, with much more than three hundred workers. With the improvement of precision bearings as the improvement route, the firm specializes in the analysis and advancement and manufacture of 3 sequence of precision rotary table bearings, cross roller bearings and robotic reducer bearings. The precision grades are P2, P4 and P5, and the dimensions selection is 20mm ~2000mm. Steady advancement and breakthrough in technological innovation research and development and processing engineering, improve the extensive efficiency of bearings,and crack the lengthy-expression monopoly of related overseas products in China. At present, it has occupied 80% of YRT rotary table bearing marketplace and precision cross roller bearing market in China, 90% of the domestic harmonic reducer bearing marketplace, thirty% of the domestic RV reducer bearing industry, fifty% of the products are exported to Europe, North The us, India, South Korea, and so on.

Product record

Type	size					Tightening torque of screw	Basic load ranking				Limited speed5)	Friction Moment3)	weight
	size						Axial		Radial
	d	D	H	H1	H2		Dynamic	Static	Dynamic	Static
	unit:mm					MA2)	Ca	Coa	Cr	Cor	Grease
	unit:mm					N m	KN				r/min	Nm	≈Kg
YRT50	50	126	thirty	twenty	ten	eight.5	38	158	28.five	49.5	600	2.5	one.six
YRT80	80	146	35	23.35	11.sixty five	eight.five	56	255	42.5	100	530	3	2.4
YRT100	100	185	38	25	thirteen	eight.5	76.5	415	forty seven.five	one hundred twenty	430	3	4.1
YRT120	120	210	forty	26	fourteen	fourteen	102	540	fifty two	143	340	seven	five.three
YRT150	one hundred fifty	240	forty	26	fourteen	14	112	630	56	170	320	10	6.two
YRT180	180	280	forty three	29	fourteen	fourteen	118	710	sixty nine.5	200	280	12	7.seven
YRT200	two hundred	three hundred	forty five	30	fifteen	fourteen	120	765	81.5	220	260	14	nine.seven
YRT260	260	385	fifty five	36.five	18.five	34	one hundred sixty	1060	ninety three	290	200	twenty	eighteen.three
YRT325	325	450	sixty	40	twenty	34	275	1930	a hundred and twenty	345	170	40	25
YRT395	395	525	65	42.five	22.five	34	300	2280	186	655	one hundred forty	55	33
YRT460	460	600	70	46	24	34	355	2800	200	765	one hundred twenty	70	forty five
YRT580	580	750	ninety	sixty	thirty	sixty eight	490	4250	228	965	eighty	one hundred forty	89
YRT650	650	870	122	seventy eight	44	116	one thousand	8000	455	1730	sixty five	200	a hundred and seventy
YRT850	850	1095	124	80.five	43.5	284	1040	8650	490	1800	fifty	300	253
YRT950	950	1200	132	86	forty six	284	1290	11400	530	2040	40	600	312
YRT1030	1030	1300	a hundred forty five	ninety two.5	52.5	284	1380	12000	620	2650	35	800	375
YRT1200	1200	1490	164	108	fifty six	284	1435	12850	745	2800	25	a thousand	450

WHY Select HONB

one.Merchandise Advantages
Solution high quality is fundamental for the surival of HONB.
HONB bearing possesses the characteristics of large precision, substantial dependability and lengthy lifestyle.

2.Rapidly Shipping and delivery
From ID dimensions twenty~300mm, we have enough stocks of elements.
The guide time is in 7 times.

3.Personalised Customization
Acknowledge customized merchandise, acknowledge OEM / ODM.

four.Pre-sale and soon after-sale service
Pre-sales specialized support, soon after-product sales technical advice conversation, 24 several hours on the internet.

five.Top quality Guarantee
We have a QC team to examine the merchandise from original process to closing packing according to drawing element.
Settle for third social gathering inspection and also offer Movie inspection.
For Crossed roller bearings, we offer 1 calendar year guarantee, if bearing troubles, we substitute new bearing at DDP price.

To Be Negotiated 1 Piece
(Min. Order)

###

Rolling Body:	Roller Bearings
The Number of Rows:	Multi-column
Outer Dimension:	Medium and Large(120-190mm)
Material:	Bearing Steel
Spherical:	Non-Aligning Bearings
Load Direction:	Axial and Radial Load

###

Customization:	Available \|

###

Type	size					Tightening torque of screw	Basic load rating				Limited speed5)	Friction Moment3)	weight
	size						Axial		Radial
	d	D	H	H1	H2		Dynamic	Static	Dynamic	Static
	unit:mm					MA2)	Ca	Coa	Cr	Cor	Grease
	unit:mm					N m	KN				r/min	Nm	≈Kg
YRT50	50	126	30	20	10	8.5	38	158	28.5	49.5	600	2.5	1.6
YRT80	80	146	35	23.35	11.65	8.5	56	255	42.5	100	530	3	2.4
YRT100	100	185	38	25	13	8.5	76.5	415	47.5	120	430	3	4.1
YRT120	120	210	40	26	14	14	102	540	52	143	340	7	5.3
YRT150	150	240	40	26	14	14	112	630	56	170	320	10	6.2
YRT180	180	280	43	29	14	14	118	710	69.5	200	280	12	7.7
YRT200	200	300	45	30	15	14	120	765	81.5	220	260	14	9.7
YRT260	260	385	55	36.5	18.5	34	160	1060	93	290	200	20	18.3
YRT325	325	450	60	40	20	34	275	1930	120	345	170	40	25
YRT395	395	525	65	42.5	22.5	34	300	2280	186	655	140	55	33
YRT460	460	600	70	46	24	34	355	2800	200	765	120	70	45
YRT580	580	750	90	60	30	68	490	4250	228	965	80	140	89
YRT650	650	870	122	78	44	116	1000	8000	455	1730	65	200	170
YRT850	850	1095	124	80.5	43.5	284	1040	8650	490	1800	50	300	253
YRT950	950	1200	132	86	46	284	1290	11400	530	2040	40	600	312
YRT1030	1030	1300	145	92.5	52.5	284	1380	12000	620	2650	35	800	375
YRT1200	1200	1490	164	108	56	284	1435	12850	745	2800	25	1000	450

To Be Negotiated 1 Piece
(Min. Order)

###

Rolling Body:	Roller Bearings
The Number of Rows:	Multi-column
Outer Dimension:	Medium and Large(120-190mm)
Material:	Bearing Steel
Spherical:	Non-Aligning Bearings
Load Direction:	Axial and Radial Load

###

Customization:	Available \|

###

Type	size					Tightening torque of screw	Basic load rating				Limited speed5)	Friction Moment3)	weight
	size						Axial		Radial
	d	D	H	H1	H2		Dynamic	Static	Dynamic	Static
	unit:mm					MA2)	Ca	Coa	Cr	Cor	Grease
	unit:mm					N m	KN				r/min	Nm	≈Kg
YRT50	50	126	30	20	10	8.5	38	158	28.5	49.5	600	2.5	1.6
YRT80	80	146	35	23.35	11.65	8.5	56	255	42.5	100	530	3	2.4
YRT100	100	185	38	25	13	8.5	76.5	415	47.5	120	430	3	4.1
YRT120	120	210	40	26	14	14	102	540	52	143	340	7	5.3
YRT150	150	240	40	26	14	14	112	630	56	170	320	10	6.2
YRT180	180	280	43	29	14	14	118	710	69.5	200	280	12	7.7
YRT200	200	300	45	30	15	14	120	765	81.5	220	260	14	9.7
YRT260	260	385	55	36.5	18.5	34	160	1060	93	290	200	20	18.3
YRT325	325	450	60	40	20	34	275	1930	120	345	170	40	25
YRT395	395	525	65	42.5	22.5	34	300	2280	186	655	140	55	33
YRT460	460	600	70	46	24	34	355	2800	200	765	120	70	45
YRT580	580	750	90	60	30	68	490	4250	228	965	80	140	89
YRT650	650	870	122	78	44	116	1000	8000	455	1730	65	200	170
YRT850	850	1095	124	80.5	43.5	284	1040	8650	490	1800	50	300	253
YRT950	950	1200	132	86	46	284	1290	11400	530	2040	40	600	312
YRT1030	1030	1300	145	92.5	52.5	284	1380	12000	620	2650	35	800	375
YRT1200	1200	1490	164	108	56	284	1435	12850	745	2800	25	1000	450

Advantages and disadvantages of different types of bushings

Bushings are a simple but essential part of machinery with sliding or rotating shaft assemblies. This type of bearing is used in a wide variety of industries because its high load-carrying capacity and excellent anti-friction properties make it a necessity for construction, mining, hydropower, transportation and agricultural machinery. In addition to these applications, bushings also play a vital role in material handling and food processing. This article explores the various types of bushings available.
bushing

air casing

The air bushing forms a frictionless cylinder that applies the load to the rotating object. Bushings are used to measure torque and provide self-centering force in applications where linear motion is critical. The following are load equations that can be used to select the appropriate air sleeve for your application. To learn more about these air sleeves, read on. This article discusses the benefits and uses of air bushings in linear motion.
Bushings have many advantages over bearings. They are not prone to wear and corrosion. Unlike bearings, they can easily bypass conversion and inspection periods. Their high-quality design guarantees reliable machine performance, yet they are inexpensive and easy to replace. In many industries, air compressors are essential for sports. The air bushing eliminates friction, allowing the compressor to work more efficiently. They can also help eliminate the need for frictionless bearings and improve the overall efficiency of the machine.
Another type of air bearing is the cylindrical bushing. These are used for linear and aerostatic motion. Their low friction properties allow them to support radial loads without wearing out or damaging components. They are usually used for normal sized shafts. Air bushings have several components that can be used with other types of air bearings. Cylindrical air bearings have four o-ring grooves that allow them to be inserted into the structure. They are often used with other types of air bearings for smoother motion.

rubber bushing

If you’re looking to buy a new suspension system, you may be wondering if rubber or polyurethane is the right choice. Rubber is less expensive, but not without its drawbacks. Polyurethane is more durable and offers better handling and suspension. Rubber bushings also reduce road feel, while polyurethane isolates the driver from the road. Both materials will help you improve handling and alignment, but each has advantages and disadvantages.
Typically, rubber bushings are cylindrical components with metal inner and outer surfaces. These metals can be stainless steel, mild steel or aluminum. They are usually stress relieved and prestressed for maximum durability. They are designed to meet the exact specifications of a specific application. For example, shock-absorbing rubber bushings are cushioning pads made of polyurethane that absorb road bumps and noise.
Unlike polyurethane, rubber suspension bushings have a shorter lifespan than polyurethane. This is because rubber is more susceptible to damage from UV rays, road chemicals and oils. The rubber also stretches and warps due to the pressure of the road. The rubber bushing also squeaks, which can be cause for concern. But if the noise persists for a long time, it may be a sign that your vehicle needs a new suspension system.
The main reason why cars use rubber bushings is for shock absorption. During machine use, vibration and noise caused by the movement of parts can cause serious damage. To prevent this, rubber bushings act as shock absorbers and damping agents. Rubber bushings are an excellent choice for automakers, but they are also used in a variety of industrial settings.
bushing

Polyurethane bushing

If you want to make your vehicle handle better, polyurethane bushings may be the answer. They come in different shapes and sizes and can improve a wide range of areas. This article will explore the advantages and disadvantages of polyurethane bushings and their potential place in your car. However, before you decide to upgrade your suspension, you should understand the various advantages and disadvantages of polyurethane bushings.
The main difference between a polyurethane bushing and a rubber bushing is how the bushing rides on the suspension arm. Polyurethane bushings do not have faces that slide against each other like rubber bushings. This means they allow for more rotation and flexion, as well as consistent alignment of the control arms. Polyurethane bushings require lubrication, but only need to be lubricated every five years, much longer than equivalent rubber bushings.
Another difference between polyurethane and rubber bushings is hardness. The former has the least elasticity and is generally the most suitable for street use. While rubber bushings provide the best NVH quality, they are also notorious for changing suspension geometry. Rubber is known to be an excellent choice for street use, but polyurethane has a lifespan that far outlasts rubber.

bronze bushing

There are two main types of bronze bushings, sintered and cast. The latter require additional lubrication and are typically used in applications where powder metal products cannot be secured. The former is cheaper than the latter, but the process is more expensive. Bronze bushings can be used in environments where the material will be exposed to high temperature and vibration. For these reasons, the production process is relatively slow and expensive.
The strength of bronze is the main reason why they are so popular. Brass is a softer metal that deforms and corrodes easily. The bronze casing can withstand continuous immersion in water and can last for hundreds of years with little or no maintenance. However, it is important to note that this metal is not resistant to aggressive chemicals and requires regular maintenance to keep it in good condition.
Bronze bushings offer many advantages, including durability and aesthetics. Bronze bushings are available in a variety of sizes and can be ordered in imperial and metric sizes. They can be built to your specifications and are very durable. You can even custom order them if you want. And because they can be customized, they are an excellent choice for high-end applications. The quality of the bronze bushings is second to none.

Plastic bushing

Engineered composite plastic bushings have been shown to last longer than bronze bushings and have also been found to reduce maintenance costs by up to 40%. Plastic bushings have become the first choice for thousands of applications, including medical equipment, food processing machinery, pumps, and more. Bronze bushings are oil-impregnated, but their performance is limited by their inherent weaknesses: oil-impregnated bronze tends to develop high levels of capillary action and requires rotational motion to maintain an intact oil film. Low speed and intermittent use of bronze bushings can also hinder the ability of the lubricant to provide adequate lubrication.
Advantages of plastic bushings over metal include low friction, non-reactive surfaces, and long life. CZPT offers a variety of engineering plastics that outperform traditional metals in a range of applications. For example, nylon bushings resist wear while requiring little lubrication. In addition, polymer-shaped plastics are lightweight and highly resistant to aggressive cleaning agents and chemicals.
Besides being less expensive than metal bushings, plastic bushings offer many other advantages. They are very durable, have a low coefficient of friction, and are more wear-resistant than metal. Unlike metal, plastic bushings do not require lubrication and do not absorb dust and oil like metal bushings. They are lightweight, easy to maintain and last longer. This makes them an excellent choice for many applications.
bushing

Sleeve bearing

Sleeve bearings are simple pipes with matching components. They facilitate linear motion by absorbing friction and vibration. They can withstand heavy loads and work at high temperatures for long periods of time. Flange bearings are similar to sleeve bearings, but are enclosed and rotated in a housing unit. Sleeve bearings have higher load-carrying capacity and resistance to shock loads. Furthermore, they are lightweight and low cost.
Another name for sleeve bearings is babbitt radial bearings. These bearings are usually made of bronze and have straight inner and outer diameters. They are also impregnated with oil and can withstand radial loads. Typical uses for sleeve bearings are agriculture, automotive and machine tools. Sleeves can also be solid or cored material, depending on the intended use.
The type of sleeve bearing used in the bushing is important in determining which type of bushing to buy. Sleeve bearings are sized based on pressure and speed considerations. Typically, the PV limit is an upper bound on the combined pressure and velocity for a given casing material. In some cases, the sleeve bearing used in the bushing is the same as the plain bearing.
Sleeve bearings are simple in design and made from a variety of materials, including bronze and plastic. They are more affordable than metal, but plastic is still not inaudible. Plastic sleeve bearings will rattle like metal bearings if the gap between the two bushings is not accurate. Additionally, high temperature electronic painting can permanently thin the casing. The stainless steel backing provides a good surface for electronic painting and enhances abrasion resistance.

editor by CX 2023-04-03